Drawings · Measures drawings and prices the work

Drawing take-off and estimates for construction companies

Pilot programme · limited places

Upload the drawing: Arkvia measures it and compares it with the design, and you validate every figure before it goes into the budget.

Differences from the design, before you buy materials. Arkvia reads the drawing, measures the rooms and compares every quantity with the design budget. You choose which figure stands and confirm every measurement: nothing counts until then.

How it's used

From drawing to validated measurement

Arkvia reads an AutoCAD drawing and answers questions about its rooms, measures the flooring for a refurbishment and compares it with the design budget, and a person confirms every figure before the budget is drawn up.

Read the video as text

Introduction

Measurements read from the drawing, checked against the design

  • Areas and elements identified. Taken directly from the AutoCAD file
  • Differences spotted early. Drawing and design compared by room
  • Your team decides. Every figure validated before it reaches the budget

The drawing, read

  • Arkvia reads the AutoCAD drawings for each project. It uses the original file (DWG), stored in Arkvia’s document library.
  • Get rooms and areas without measuring by hand. The square metres shown on the drawing for each room.
  • Arkvia identifies and counts the drawing’s elements. Doors and sanitary fittings, for example, numbered for you to review.

Ask the drawing

  • Ask the drawing questions in plain language. Arkvia answers with data from the drawing and highlights the room in question.
  • A single question can cover several rooms. The answer highlights every room and totals the area.

Measurement by room

  • On the drawing, mark the rooms you’re refurbishing. Their measurement is calculated: square metres of flooring and metres of skirting.
  • The total measurement updates with each room marked. Flooring comes from the drawing; skirting is an estimate pending verification.

Comparison with the design

  • Compare the measurement with the design budget. Each quantity is checked against the design before you buy materials.
  • See every difference from the design, by room. Find out the cost of anything the design leaves out.
  • Arkvia also reviews the design budget. It flags errors and inconsistencies, such as a unit that doesn’t match the measurement.

Review and confirmation

  • Decide which figure goes into your budget. When the drawing and design differ, choose one figure and note why.
  • Confirm the measurement; name and date are logged. Only the confirmed measurement is used to cost the project.

From drawing to budget

  • Arkvia estimates a budget from the confirmed measurement. It proposes prices from your invoices and hours from completed projects.
  • The measurement is saved in the document library. The Arkvia assistant can also answer questions about it.
  • One single measurement for the whole company. Budget, purchasing and construction all start from the same reviewed figure.

Conclusion

Faster measurements, reviewed by your team

  • Higher-value work. Arkvia prepares the measurement; you decide
  • Fewer surprises on site. Differences from the design, before you buy
  • Linked to the budget. Costed with your own purchase prices

Features

What it does

Measurements without redrawing

Arkvia reads the original file, in DWG or DXF, stored with the project's documents: every room with its area, and elements such as doors or sanitary fittings, numbered for you to review.

Ask the drawing

In plain language: the area of one room or of several at once. The answer comes from the drawing's data, highlights the rooms on the drawing and totals their area.

Measure what you're refurbishing

Mark the rooms being refurbished on the drawing and you get the measurement: square metres of flooring and metres of skirting. Anything that's an estimate is flagged for you to check.

Spots what doesn't add up

It compares every quantity with the design budget, room by room, and tells you what anything the design leaves out would cost. It also reviews the budget itself: units, measurements and amounts that don't match.

Nothing counts until you validate it

If the drawing and the design differ, you choose which figure goes into the budget and note why. When you confirm, your name and the date are recorded, and only the confirmed measurement is used to cost the project.

From drawing to budget

With the confirmed measurement, Arkvia estimates the budget with the prices from your invoices and the productivity rates from your completed projects. The measurement is saved in the document library and the assistant can answer questions about it.

Every drawing is read in an isolated environment with no internet connection, and stored in Europe with the rest of your documents. How we protect your data

FAQ

Frequently asked questions

Which drawings does it read?

DWG and DXF drawings, the AutoCAD formats. If a drawing comes from a very recent version, just save it as DWG 2018 or as DXF.

Are the measurements exact?

Arkvia proposes and you validate. Every measurement is checked on the drawing before it counts, and anything that can't be read reliably is flagged rather than made up. It doesn't replace a professional measurement of the project: it takes away the repetitive work.

Where do the prices come from?

From your company: material prices from your suppliers' invoices, and productivity rates (the hours per unit of work) from the projects you've already completed and have in your document library. Arkvia proposes them with their source and you review the budget before submitting it.

Is it available yet?

It's in a pilot programme with limited places: we switch it on for the companies in the programme. Book a demo and we'll try it with one of your drawings.

One platform

Eight services on the same data

Every document is uploaded once and every service uses it: the invoice you allocate to a project reaches the management dashboard, and the budget you won it with becomes its Gantt chart. You win more work, win back hours and lay the foundations for artificial intelligence.